This is the right place to discuss on how to implement hardware vsync, adding a VIA or AY chipset, puting multiple roms, or how to design a new flash expansion card.
User avatar
Flight Lieutenant
Posts: 453
Joined: Fri Nov 26, 2010 9:11 pm
Location: France PdD

Re: Erebus.

Post by kenneth »

The power supply must be able to provide at least 1A.
Posts: 4
Joined: Sat Aug 20, 2022 10:53 am

Re: Erebus.

Post by maded2 »

ok, Traco voltage regulator is in, I've also changed the reset capacitor to 10uF. It is now only drawing ~300mA, so my existing power supply is also stable with the new lower current. The EREBUS seems to run stable now.

many thanks for all the help and suggestions.

Post Reply