This is the right place to discuss on how to implement hardware vsync, adding a VIA or AY chipset, puting multiple roms, or how to design a new flash expansion card.
There are a couple of interested parties on the Oric Facebook group. Can you give me the combined cost of the Controller and Amplibus please and I will forward the info on?
Silicebit. wrote:kerkyra2007, McOric and AndyRCM added in list.
I'm sorry but I have no idea that I need for this.
Amplibus + Controller?
Both, or only one of them, to use my micro sd Oric atmos or similar. I hope you can help me[/size].
You need the controller AND the Amplibus. The Oric bus signals are too weak and noisy. You will also need a floppy disk drive (3.5, 3 or 5.25). Alternatively, you can use an HxC floppy emulator or a Gotek with the HxC firmware.
The controller can work with up to four drives (I have mine with two).
Chema wrote:You need the controller AND the Amplibus. The Oric bus signals are too weak and noisy. You will also need a floppy disk drive (3.5, 3 or 5.25). Alternatively, you can use an HxC floppy emulator or a Gotek with the HxC firmware.
The controller can work with up to four drives (I have mine with two).
Chema wrote:You need the controller AND the Amplibus. The Oric bus signals are too weak and noisy. You will also need a floppy disk drive (3.5, 3 or 5.25). Alternatively, you can use an HxC floppy emulator or a Gotek with the HxC firmware.
The controller can work with up to four drives (I have mine with two).
The Zaxon flopper should work fine with the controller!