Scart cable

This is the right place to discuss on how to implement hardware vsync, adding a VIA or AY chipset, puting multiple roms, or how to design a new flash expansion card.
Post Reply
Igotafro
Officer Cadet
Posts: 47
Joined: Tue Feb 05, 2008 3:42 pm

Scart cable

Post by Igotafro »

Today I made this Scart cable:

Image

Amazing picture on my little TV :)
I'm going to add a switch for the vsync-hack and connectors for tape later.
I disconnected the internal speaker so I have sound on the TV instead.

User avatar
Chema
Game master
Posts: 2734
Joined: Tue Jan 17, 2006 10:55 am
Location: Gijón, SPAIN
Contact:

Re: Scart cable

Post by Chema »

That looks really nice.

I also made an scart table (much shoddier than yours, just to get the TV pic and signal RGB - no resistors, no tape-in...) and I must say the pic on the TV is fantastic. At least when compared with the horrible picture I got with the antenna connector...

A real must, imho.

User avatar
ibisum
Wing Commander
Posts: 1375
Joined: Fri Apr 03, 2009 8:56 am
Location: Vienna, Austria
Contact:

Re: Scart cable

Post by ibisum »

At the start of my Oric revival, I bought a SCART off EBay made just for the Oric/Atmos, and I have to say its the cleanest, nicest display I ever experienced .. all we had in the 80's in Australia was bits of barbed wire to stuff into the RCA jack, whatever, lol .. my early PINGZAPSHOOT days, lets say, were fuzzy. :)

User avatar
kenneth
Flight Lieutenant
Posts: 356
Joined: Fri Nov 26, 2010 9:11 pm
Location: France PdD
Contact:

Re: Scart cable

Post by kenneth »

Nice work !
With the little plug you don't need a "French oric" (with a 5v-supplied RGB) :D

Post Reply