ORIC SDCARD
Re: ORIC SDCARD
I got the bottom half printed. This is actually the second attempt. The first one warped itself from the bed plus I had to make some adjustments into the model.
Re: ORIC SDCARD
Thanks! I’m really happy with how it turned out. Of course, the case could’ve been a bit deeper, as the SD card module is sticking out from the back. I had to go with a guesstimate in regards of that when I was modeling the case. I still need to find some suitable self-tapping screws to put the case together and to fasten the Erebus board.
-
- Flight Lieutenant
- Posts: 322
- Joined: Thu Sep 21, 2006 7:45 pm
- Location: 26000 Valence, FRANCE
- Contact:
Re: ORIC SDCARD
I'm still not too fond of 3D printing for such cases but I must admit it looks way better than the Cumulus already!
But why put the SD slot at the bottom and not on the top part (at the red-black junction)?
On the other end I the blue SD part protruding from the Cumulus doesn't look that nice either…
But why put the SD slot at the bottom and not on the top part (at the red-black junction)?
On the other end I the blue SD part protruding from the Cumulus doesn't look that nice either…
-
- Flight Lieutenant
- Posts: 322
- Joined: Thu Sep 21, 2006 7:45 pm
- Location: 26000 Valence, FRANCE
- Contact:
Re: ORIC SDCARD
You know there are black versions of the HE10
Re: ORIC SDCARD
Truth be told, I had to base the depth of the case on an educated guess as I didn’t have the SD card module at hand at the time I was modeling the case. Hence, it’s protruding. Also, in hindsight, I did realize it would’ve made more sense to put the whole card the other way around with the connector in the back and the card reader in the front. I might design a version 2.0 at some point. For now, the current version will suffice for me.mmu_man wrote: ↑Tue Feb 16, 2021 10:38 pm I'm still not too fond of 3D printing for such cases but I must admit it looks way better than the Cumulus already!
But why put the SD slot at the bottom and not on the top part (at the red-black junction)?
On the other end I the blue SD part protruding from the Cumulus doesn't look that nice either…
Re: ORIC SDCARD
Undoubtedly, but there’s no Digikey around where I live. The local store has only these light blue ones.
-
- Flight Lieutenant
- Posts: 322
- Joined: Thu Sep 21, 2006 7:45 pm
- Location: 26000 Valence, FRANCE
- Contact:
Re: ORIC SDCARD
Still quite cute this wayprotek wrote: ↑Mon Feb 22, 2021 9:55 pm Truth be told, I had to base the depth of the case on an educated guess as I didn’t have the SD card module at hand at the time I was modeling the case. Hence, it’s protruding. Also, in hindsight, I did realize it would’ve made more sense to put the whole card the other way around with the connector in the back and the card reader in the front. I might design a version 2.0 at some point. For now, the current version will suffice for me.
That was just an example. I actually started ordering some parts from aliexpress, that's way cheaper, and you can find things like pre-moulded barrel jack + cable that saves a lot of work. Although I'd probably still get some chips from RS or Digikey, even if they likely come from the same source anyway.
Re: ORIC SDCARD
I've been toying with loading a TAP file from a DSK based system, (ie: Erebus running on a Cumulus), but I seem to upset the BASIC, probably because I've not setup all the addresses properly.
Is there an actual list of which page zero/page 2 variables have to be set to make the Oric BASIC happy?
Is there an actual list of which page zero/page 2 variables have to be set to make the Oric BASIC happy?
- ibisum
- Wing Commander
- Posts: 1652
- Joined: Fri Apr 03, 2009 8:56 am
- Location: Vienna, Austria
- Contact:
Re: ORIC SDCARD
There is, in the "Oric Advanced User Guide", page 260, Appendix C and D, a list of all vars used in Page 0 and Page 2 by the Oric ROM .. Perhaps the better approach would be 'restore all of them'?
Re: ORIC SDCARD
Actually manage to fix it, I had 2a9/2ab/2aa/2ac inverted (for some reason the tape header address is in big endian in the tape format)
- ibisum
- Wing Commander
- Posts: 1652
- Joined: Fri Apr 03, 2009 8:56 am
- Location: Vienna, Austria
- Contact:
Re: ORIC SDCARD
Argh, hton() and ntoh() ..
Re: ORIC SDCARD
Haven't coded in a while so I forgot a bit, but Novalight sets everything so an ASM or Basic program auto-runs fine on both ROM 1.1 or ROM 1.0 (with ROM calls though). The code is probably a bit compact and not easy to read, but at least it worked
Re: ORIC SDCARD
Do you have a link to the latest version?