Cumulus Preorder Thread
- ibisum
- Wing Commander
- Posts: 1652
- Joined: Fri Apr 03, 2009 8:56 am
- Location: Vienna, Austria
- Contact:
Re: Cumulus Preorder Thread
Yeah - metadata gets a huge promotion in my eyes. His effort to get the Cumulus out here to us all - and of course Retromaster too, who must be *never* forgotten in this Cumulus adventure because it was his hard work that got us most of the way - has made the world of Oric users a lot, lot brighter.
Re: Cumulus Preorder Thread
Two Cumulus recieved, it feels like Christmas
Very carefully packaged and protected, great work Metadata.
For the French, if you are using the shipment tracking: don't worry, as soon as it arrives in France, you won't have any update anymore (who said "typical" ? )
Before doing anything wrong, I'm searching how to plug - and what the switch (I mean: the jumper) is for on the bus card. Can't recall where the info can be, but don't want to do anything wrong
EDIT: ok, seen the plugging picture at the 1st page of this thread, and will try this way.
What is that jumper for, I'll check later !
Very carefully packaged and protected, great work Metadata.
For the French, if you are using the shipment tracking: don't worry, as soon as it arrives in France, you won't have any update anymore (who said "typical" ? )
Before doing anything wrong, I'm searching how to plug - and what the switch (I mean: the jumper) is for on the bus card. Can't recall where the info can be, but don't want to do anything wrong
EDIT: ok, seen the plugging picture at the 1st page of this thread, and will try this way.
What is that jumper for, I'll check later !
- metadata
- Pilot Officer
- Posts: 114
- Joined: Wed Aug 31, 2011 7:59 pm
- Location: Hildesheim, Germany
- Contact:
Re: Cumulus Preorder Thread
The only thing that you can plug wrong is the Cumulubus. The chips on this little board are on the upper side.Before doing anything wrong, I'm searching how to plug
The IDE-Cable goes with the blue plug to the Cumulus and with the black one in the CumuluBus. It only fits in the right position.
If you short both of the Jumpers (Cumulus and CumuluBus) then you can connect the IDE-Cable so: Black side into CumuluBus and grey side into Cumulus.and what the switch (I mean: the jumper) is for on the bus card
Nomaly on the tracking website from DHL you find a new number from your local post if the package arrives in your country. And the you can track it on your local post webside with this new number.For the French, if you are using the shipment tracking: don't worry, as soon as it arrives in France
Re: Cumulus Preorder Thread
Thanks for the info Metadata.
Is there a place (a page) where we could group the whole information you've been giving? A bit like the 1st post of this thread but with additional things: the videos you've made (how to flash the firmware), the latest firmware binary download, and so on?
All are very useful.
Is there a place (a page) where we could group the whole information you've been giving? A bit like the 1st post of this thread but with additional things: the videos you've made (how to flash the firmware), the latest firmware binary download, and so on?
All are very useful.
- metadata
- Pilot Officer
- Posts: 114
- Joined: Wed Aug 31, 2011 7:59 pm
- Location: Hildesheim, Germany
- Contact:
Re: Cumulus Preorder Thread
Maybe we can use the Wiki for this.
http://wiki.defence-force.org/doku.php?id=oric:main
I wrote a little pdf for how to connect the CumuluBus to the Oric
http://wiki.defence-force.org/doku.php?id=oric:main
I wrote a little pdf for how to connect the CumuluBus to the Oric
- Attachments
-
- howto_cumulubus.pdf
- Howto: Connect the CumuluBus to the Oric
- (613.28 KiB) Downloaded 480 times
- coco.oric
- Squad Leader
- Posts: 720
- Joined: Tue Aug 11, 2009 9:50 am
- Location: North of France
- Contact:
Re: Cumulus Preorder Thread
Yes !
I've received my christmas gift : 2 cumulus
I'll try them asap. They work both on oric1 and Atmos
I've received my christmas gift : 2 cumulus
I'll try them asap. They work both on oric1 and Atmos
coco.oric as DidierV, CEO Member
Historic owner of Oric, Apple II, Atari ST, Amiga
Historic owner of Oric, Apple II, Atari ST, Amiga
-
- Squad Leader
- Posts: 774
- Joined: Sat May 21, 2011 7:21 pm
- Location: Between UK and France
- Contact:
Re: Cumulus Preorder Thread
metadata, do you have an idea on when you will finish to build the remaining cumulus in the order queue?
I was wondering if I can get mine before April, I will go to a convention ( AC 2014: http://www.yaronet.com/posts.php?sl=9&s=161906 ) which is mid April and want to be sure to have the time to test it before going there I want to display here some of the Twilighte works.
I was wondering if I can get mine before April, I will go to a convention ( AC 2014: http://www.yaronet.com/posts.php?sl=9&s=161906 ) which is mid April and want to be sure to have the time to test it before going there I want to display here some of the Twilighte works.
My Projects: Replic'Oric Project - StratoCumulus Project
- metadata
- Pilot Officer
- Posts: 114
- Joined: Wed Aug 31, 2011 7:59 pm
- Location: Hildesheim, Germany
- Contact:
Re: Cumulus Preorder Thread
i hope i can speed up the 'production' but i can't really say when you get yours. In the moment i have only a few hours per week to solder the boards.
Re: Cumulus Preorder Thread
I'm calmly waiting mine Please don't rush and take it easy as long as the final product will be as perfect and precise as possible.
To be honest, I am a bit concerned after reading all the complaints and problems that people expressed in cumulus thread. I hope I won't experience such problems when I got mine.
To be honest, I am a bit concerned after reading all the complaints and problems that people expressed in cumulus thread. I hope I won't experience such problems when I got mine.
- ibisum
- Wing Commander
- Posts: 1652
- Joined: Fri Apr 03, 2009 8:56 am
- Location: Vienna, Austria
- Contact:
Re: Cumulus Preorder Thread
I'd be happy to help you solder the boards if you want to ship the parts to me, metadata .. anything we can do to get the Cumulus community growing, I'm happy to help.
- barnsey123
- Flight Lieutenant
- Posts: 379
- Joined: Fri Mar 18, 2011 10:04 am
- Location: Birmingham
Re: Cumulus Preorder Thread
I wouldn't worry too much. Just be sure to check the cables, make sure everything is connected OK (take your time) and insert the SDHC cards LABEL SIDE DOWN....and check the power supply 9V, 1.xAmps.peacer wrote:To be honest, I am a bit concerned after reading all the complaints and problems that people expressed in cumulus thread. I hope I won't experience such problems when I got mine.
The oric is quirky and so are its devices...(and it's users)
Re: Cumulus Preorder Thread
I'll follow every steps as if I am dealing with stopping the detonation of a bomb Red wire or blue
- metadata
- Pilot Officer
- Posts: 114
- Joined: Wed Aug 31, 2011 7:59 pm
- Location: Hildesheim, Germany
- Contact:
Re: Cumulus Preorder Thread
you Cumulus is almost ready. I am printing your case at the moment.I'm calmly waiting mine
I am testing the Cumulus for jorodr&iss right now.
Re: Cumulus Preorder Thread
Wow Really excited Thanksmetadata wrote:you Cumulus is almost ready. I am printing your case at the moment.I'm calmly waiting mine
I am testing the Cumulus for jorodr&iss right now.
Re: Cumulus Preorder Thread
Yes! Great news! Thanks for your effort, metadata.