IJK interface diagrams.
- Silicebit.
- Flight Lieutenant
- Posts: 313
- Joined: Thu Jan 12, 2006 10:18 pm
- Location: Madrid, Spain
- Contact:
IJK interface diagrams.
How kenneth is very interested in the IJK interface, I put the schematic diagrams here for his enjoyment.
Blocks diagram. Schematic diagram. And all information here. It is a project in wait state.
Regards.
Blocks diagram. Schematic diagram. And all information here. It is a project in wait state.
Regards.
Oric user since 1984. YouTube
- coco.oric
- Squad Leader
- Posts: 720
- Joined: Tue Aug 11, 2009 9:50 am
- Location: North of France
- Contact:
Re: IJK interface diagrams.
Nice post, i'll take a look at this joystick.
Dreaming of it for my oric. I hope it will be possible for me to build one.
Dreaming of it for my oric. I hope it will be possible for me to build one.
coco.oric as DidierV, CEO Member
Historic owner of Oric, Apple II, Atari ST, Amiga
Historic owner of Oric, Apple II, Atari ST, Amiga
Re: IJK interface diagrams.
@Silicebit: Thanks for these files. This will be very useful to make it. The 8912 will work better.
@Coco.oric: We can start working on it !
@Coco.oric: We can start working on it !
- ibisum
- Wing Commander
- Posts: 1655
- Joined: Fri Apr 03, 2009 8:56 am
- Location: Vienna, Austria
- Contact:
Re: IJK interface diagrams.
As soon as you figure out how to do it, I'll make one too. I had a joystick for my old Oric-1, but lost it in a move ..
Re: IJK interface diagrams.
You can also add a Joystick to your oric by using my oldschool method: Solder the pins of the connector to the arrow keys and space bars directly on the keyboard matrix and scree the connector either on the side of the case or in the hole used by the video conversion box (that you do not need if you use SCART).
Advantage: It works with all the games that uses arrow keys and space and fits in the normal Oric.
Advantage: It works with all the games that uses arrow keys and space and fits in the normal Oric.
Re: IJK interface diagrams.
smartDbug wrote:It works with all the games that uses arrow keys and space and fits in the normal Oric.
- Silicebit.
- Flight Lieutenant
- Posts: 313
- Joined: Thu Jan 12, 2006 10:18 pm
- Location: Madrid, Spain
- Contact:
Re: IJK interface diagrams.
kenneth, I would like to see this old project finished. If you can start it again and design a decent PCB, I'll be very happy.
If you need more information, feel free to ask me.
If you need more information, feel free to ask me.
Oric user since 1984. YouTube
Re: IJK interface diagrams.
Hello
I'll try with a test pcb from Conrad store.
Here are some diagrams that I did with the TCI Editor (http://b.urbani.free.fr)
I'll try with a test pcb from Conrad store.
Here are some diagrams that I did with the TCI Editor (http://b.urbani.free.fr)
- Attachments
-
- ijk pcb.zip
- (447.55 KiB) Downloaded 767 times
-
- Squad Leader
- Posts: 774
- Joined: Sat May 21, 2011 7:21 pm
- Location: Between UK and France
- Contact:
Re: IJK interface diagrams.
Hum both schematics are incomplete, I don't think you can do anything with them...
Edit: ok, the BMP from the RAR files are complete, but the PNG show on the topic are damaged
Edit2: for CAD tools I strongly recommand Kicad (Free and OpenSource) or Eagle (available for free, but not OpenSource.)
Both could be more difficult to approach, but they are able to do "professional quality" board.
Edit: ok, the BMP from the RAR files are complete, but the PNG show on the topic are damaged
Edit2: for CAD tools I strongly recommand Kicad (Free and OpenSource) or Eagle (available for free, but not OpenSource.)
Both could be more difficult to approach, but they are able to do "professional quality" board.
My Projects: Replic'Oric Project - StratoCumulus Project
- Silicebit.
- Flight Lieutenant
- Posts: 313
- Joined: Thu Jan 12, 2006 10:18 pm
- Location: Madrid, Spain
- Contact:
Re: IJK interface diagrams.
The PNG pics are only for preview and to attract the interest.
I'm using Protel DXP 2004 but I'm swapping to Kicad, I like very much and is free!!
EDIT. Kicad is available for Linux too.
I'm using Protel DXP 2004 but I'm swapping to Kicad, I like very much and is free!!
EDIT. Kicad is available for Linux too.
Oric user since 1984. YouTube
- Silicebit.
- Flight Lieutenant
- Posts: 313
- Joined: Thu Jan 12, 2006 10:18 pm
- Location: Madrid, Spain
- Contact:
Re: IJK interface diagrams.
Hey kenneth, the PCB looks cool! Does prototype work correctly?
Oric user since 1984. YouTube
Re: IJK interface diagrams.
The PCB has not yet completed. I have a joystick Spectravideo to try when I will have all assembled and pierced openings in the box.
It should be easy to do for everyone. I'll do a tutorial with pictures.
It should be easy to do for everyone. I'll do a tutorial with pictures.
- Silicebit.
- Flight Lieutenant
- Posts: 313
- Joined: Thu Jan 12, 2006 10:18 pm
- Location: Madrid, Spain
- Contact:
Re: IJK interface diagrams.
Hello Everybody, my Joystick interface is finished.
I tried it with "Attack of the cybermen" and it works nice !
Unfortunately, with Stormlord, nothing, I must verify the "fire button" connection and the second connector.
You can find there the final PCB files with holes position for the PCB legs.
- Attachments
-
- ijk pcb.zip
- (483.34 KiB) Downloaded 754 times