ORIC SDCARD

This is the right place to discuss on how to implement hardware vsync, adding a VIA or AY chipset, puting multiple roms, or how to design a new flash expansion card.
User avatar
iss
Squad Leader
Posts: 852
Joined: Sat Apr 03, 2010 5:43 pm
Location: Bulgaria
Contact:

Re: ORIC SDCARD

Post by iss » Sun Jan 06, 2019 11:43 pm

Thanks, very interesting indeed. Classic scheme - clear and well designed - no doubt it will work stable.
Actually it's very close to the scheme I used for OricExos slaves to enable RAM Overlay (which works nice too!) :).
In the doc file is written about using MAP signal to disable internal RAM (#0000..#C000),
this information can be found in other sources, but my question is:
Does anyone know about a real existing device which adds external RAM to Oric-1/Atmos ?

User avatar
ibisum
Wing Commander
Posts: 1093
Joined: Fri Apr 03, 2009 8:56 am

Re: ORIC SDCARD

Post by ibisum » Mon Jan 07, 2019 11:15 am

I really want to make one of these ORIC SDCARD projects - anyone else interested? I think we can (affordably) do a small production run of PCB's if we get enough interest ..

romualdl
Officer Cadet
Posts: 52
Joined: Tue Jan 17, 2006 9:42 pm
Location: France

Re: ORIC SDCARD

Post by romualdl » Mon Jan 07, 2019 5:32 pm

I would be in. But as stated before, there are some differences between the schematics and the board. So for routing purpose it should be better to wire them correctly. I will have a look at it by the end of the week (I have a sdlep to solder for my Acorn Electron and Matra Alice before ;) ).

User avatar
ibisum
Wing Commander
Posts: 1093
Joined: Fri Apr 03, 2009 8:56 am

Re: ORIC SDCARD

Post by ibisum » Tue Jan 08, 2019 12:07 pm

Would be good to get this sorted out - I'll commit to at least 5 of these boards, out of the batch .. and am willing to finance more if there is interest and we might get them distributed, over time, to other Oric users.

User avatar
Voyageur
2nd Star Corporal
Posts: 25
Joined: Thu Oct 18, 2018 8:25 am
Location: Sydney

Re: ORIC SDCARD

Post by Voyageur » Sun Jan 13, 2019 10:51 am

I also would be in.
I intend to make a dirty one for tests but it will be great to get a nice card.
Oric Atmos : a new life !

romualdl
Officer Cadet
Posts: 52
Joined: Tue Jan 17, 2006 9:42 pm
Location: France

Re: ORIC SDCARD

Post by romualdl » Sun Jan 13, 2019 8:18 pm

I have ordered the parts to make one for testing ;)

User avatar
Voyageur
2nd Star Corporal
Posts: 25
Joined: Thu Oct 18, 2018 8:25 am
Location: Sydney

Re: ORIC SDCARD

Post by Voyageur » Wed Jan 23, 2019 11:13 am

Thanks to Edl42 !
I've modified a little bit the code and the schematics to use a 1602 I2C LCD (only 2 pins for the Nano : A4 and A5).
I am just waiting for a SD card reader module and soon, I will made a 'dirty" copy of it.
Will report whatever is the result. 8)
Oric Atmos : a new life !

romualdl
Officer Cadet
Posts: 52
Joined: Tue Jan 17, 2006 9:42 pm
Location: France

Re: ORIC SDCARD

Post by romualdl » Wed Jan 23, 2019 4:13 pm

Hehe still waiting for the parts here to finish mine. Hope to get them soon...

User avatar
kenneth
Flying Officer
Posts: 193
Joined: Fri Nov 26, 2010 9:11 pm
Location: France PdD
Contact:

Re: ORIC SDCARD

Post by kenneth » Sat Mar 09, 2019 12:19 am

Je teste actuellement une lecture du répertoire racine d'une carte SD avec des portes logiques et un EPROM 64k. Le projet n'est pas terminé...


User avatar
Voyageur
2nd Star Corporal
Posts: 25
Joined: Thu Oct 18, 2018 8:25 am
Location: Sydney

Re: ORIC SDCARD

Post by Voyageur » Mon Mar 11, 2019 8:44 am

I finally made a dirty version of the ORIC SDCARD and that's working pretty well...

Have a look here :

https://youtu.be/QB_Fa6f4D-g

Thanks to EdL42 ! :D
Oric Atmos : a new life !

User avatar
kenneth
Flying Officer
Posts: 193
Joined: Fri Nov 26, 2010 9:11 pm
Location: France PdD
Contact:

Re: ORIC SDCARD

Post by kenneth » Mon Mar 11, 2019 11:57 am

Nice ! 8)

zaxon
1st Star Corporal
Posts: 12
Joined: Thu Jun 29, 2017 9:51 am

Re: ORIC SDCARD

Post by zaxon » Sat May 04, 2019 8:35 am

Assembled ;) Lot of wires. :D

Image

I think do some PCB so interface can looks like this ?

Image

User avatar
Chema
Game master
Posts: 2447
Joined: Tue Jan 17, 2006 10:55 am
Location: Gijón, SPAIN
Contact:

Re: ORIC SDCARD

Post by Chema » Sat May 04, 2019 9:59 am

Looks terrific! :D

User avatar
ibisum
Wing Commander
Posts: 1093
Joined: Fri Apr 03, 2009 8:56 am

Re: ORIC SDCARD

Post by ibisum » Sat May 04, 2019 3:10 pm

This is really beautiful. Only thing I wonder is if its going to be possible to somehow mount .DSK images programmatically from the Oric itself, rather than requiring user interaction...

User avatar
Symoon
Archivist
Posts: 1631
Joined: Sat Jan 14, 2006 12:44 am
Location: Paris, France
Contact:

Re: ORIC SDCARD

Post by Symoon » Sat May 04, 2019 4:32 pm

This looks great!
Makes me think that we could re-use old joysticks (quickshot style), integrate a screen and use the joystick + fire button to navigate in the menus ;)

Post Reply