Page 3 of 10

Re: IJK interface diagrams.

Posted: Tue Dec 10, 2013 10:58 am
by barnsey123
I want one...

Re: IJK interface diagrams.

Posted: Sun May 03, 2020 2:16 pm
by kenneth
As HigashiJun is interested in making a joystick interface, and in order not to pollute the other thread, I place here the diagram of an untested pcb project almost identical to the ijk joystick interface. :wink:
ijkjoyst2020.zip
(405.87 KiB) Downloaded 257 times

Re: IJK interface diagrams.

Posted: Sun May 03, 2020 4:20 pm
by Silicebit.
Photos of the appearance of an original IJK interface.
External appearance.
External appearance.
ijk-interface.jpg (776.68 KiB) Viewed 7687 times
Components side.
Components side.
ijk_top.jpg (2.34 MiB) Viewed 7687 times
Solder side.
Solder side.
ijk_bot.jpg (2.38 MiB) Viewed 7687 times

Re: IJK interface diagrams.

Posted: Sun May 03, 2020 4:24 pm
by Silicebit.
Schematic diagram.
Interface IJK.pdf
Schematic.
(29.51 KiB) Downloaded 351 times

Re: IJK interface diagrams.

Posted: Mon May 04, 2020 4:34 am
by HigashiJun
Nice !

Many thanks to both of you.

Cheers.

Re: IJK interface diagrams.

Posted: Fri May 22, 2020 9:05 pm
by Mustangus
i think this will need a case made for it.

Re: IJK interface diagrams.

Posted: Fri May 22, 2020 9:13 pm
by ibisum
So .. we going to do a group purchase of a few of these PCB's in bulk?

Re: IJK interface diagrams.

Posted: Fri May 22, 2020 9:47 pm
by Mustangus
If i could get them to upload on https://jlcpcb.com/ then it wouldn't cost that much, i use them all the time nice and cheap but the pcb's are good.

Re: IJK interface diagrams.

Posted: Fri May 22, 2020 9:54 pm
by ibisum
Well, I'd love to have operational joystick on my Orics.

Color me interested in a couple of PCB's. To get my entire Oric fleet up and running, I'd need 8 PCB's...

Re: IJK interface diagrams.

Posted: Sat May 23, 2020 12:52 am
by kenneth
Hello.
On the french site of oric.org Rijiji made a pcb according to my diagram, the holes are missing to put the 4 wires and the file is old, I will correct it so that the manufacturers recognize it. I'm now thinking of Dbug's phrase "verify before release" ... :oops:

Re: IJK interface diagrams.

Posted: Sat May 23, 2020 9:09 am
by Mustangus
Looks good. :)

Re: IJK interface diagrams.

Posted: Sat May 23, 2020 10:49 am
by HigashiJun
Very interesting, and with a case it would be really nice...

Re: IJK interface diagrams.

Posted: Sat May 23, 2020 3:15 pm
by Chema
A friend of mine is building one, and could not find an usable Gerber file with all the data to do it. He struggled to make a board with all the available info around and, I think, he is now waiting for some component to test it.

If you could point us to the post in Oric.org with the info, it would be invaluable! (I could not find it)

Re: IJK interface diagrams.

Posted: Sat May 23, 2020 4:06 pm
by Dbug
If somebody talented with soldering is willing to build one for me, I'm fine with paying for the work!

I had plans to make a video on the Joystick interfaces, by I only have the Opel model, so that's kind of limited content for a video :D

Re: IJK interface diagrams.

Posted: Sat May 23, 2020 7:41 pm
by kenneth
Chema wrote: Sat May 23, 2020 3:15 pm If you could point us to the post in Oric.org with the info, it would be invaluable! (I could not find it)
The message on Oric.org was written in MP, there's nothing more than the previous photo and ZIP file. I need to improve the PCB and create modern Gerber files. 8)