Microdisc replacement project

This is the right place to discuss on how to implement hardware vsync, adding a VIA or AY chipset, puting multiple roms, or how to design a new flash expansion card.
User avatar
ibisum
Squad Leader
Posts: 834
Joined: Fri Apr 03, 2009 8:56 am

Re: Microdisc replacement project

Post by ibisum » Sat Jan 18, 2014 10:03 pm

Just want to pop in and say: Cumulus kicks ass! I got mine working this evening - there is no true joy than to be able to switch disks so darned conveniently! I can't wait until we work out a way for the Oric to mount .dsks' by sending commands to the Cumulus somehow .. with this power, our little Oric's are going to be MIGHTY powerful! :)

User avatar
metadata
Pilot Officer
Posts: 114
Joined: Wed Aug 31, 2011 7:59 pm
Location: Hildesheim, Germany
Contact:

Re: Microdisc replacement project

Post by metadata » Mon Jan 20, 2014 8:15 pm

Hurray!
New red plastic arrived. Time to heat up the printer. :D
Attachments
IMG_20140120_201315.jpg
IMG_20140120_201315.jpg (130.59 KiB) Viewed 5717 times

User avatar
metadata
Pilot Officer
Posts: 114
Joined: Wed Aug 31, 2011 7:59 pm
Location: Hildesheim, Germany
Contact:

Re: Microdisc replacement project

Post by metadata » Fri Feb 07, 2014 5:20 pm

in the last few week i build a lasercutter to speed up the Cumulus production. How do a laser helps? :)
With the laser i am able to make smd stencils and so i can reflow solder the most of the smd parts of the Cumulus. Since yesterday i build 8 new boards... and now i am run out of some of the smd parts. I forgot to order more but now there are on it's way.
Now the 3D-Printer is the slowest part :)
Attachments
IMG_20140207_171236.jpg
IMG_20140207_171236.jpg (146.24 KiB) Viewed 5644 times

User avatar
tingo
Officer Cadet
Posts: 46
Joined: Sat Jul 11, 2009 11:30 am
Location: Oslo, Norway

Re: Microdisc replacement project

Post by tingo » Fri Feb 07, 2014 8:21 pm

Interesting. What material are you making your stencils out of? And what thickness?
Torfinn

User avatar
metadata
Pilot Officer
Posts: 114
Joined: Wed Aug 31, 2011 7:59 pm
Location: Hildesheim, Germany
Contact:

Re: Microdisc replacement project

Post by metadata » Sun Feb 09, 2014 10:23 pm

tingo wrote:Interesting. What material are you making your stencils out of? And what thickness?
it is plastic. I tested a few different materials and this works good with my simple laser.
http://www.amazon.de/Register-grau-DURA ... B00CQP0S4A

User avatar
tingo
Officer Cadet
Posts: 46
Joined: Sat Jul 11, 2009 11:30 am
Location: Oslo, Norway

Re: Microdisc replacement project

Post by tingo » Thu Feb 20, 2014 8:13 pm

Good to know - thanks!
Torfinn

Godzil
Squad Leader
Posts: 733
Joined: Sat May 21, 2011 7:21 pm
Location: Between UK and France
Contact:

Re: Microdisc replacement project

Post by Godzil » Fri Feb 21, 2014 2:03 am

What is your "laser"?

User avatar
metadata
Pilot Officer
Posts: 114
Joined: Wed Aug 31, 2011 7:59 pm
Location: Hildesheim, Germany
Contact:

Re: Microdisc replacement project

Post by metadata » Mon Feb 24, 2014 3:32 pm

What is your "laser"?
My laser is a 230mW 658nm (red) diode. The same diodes are build in DVD-Burner (20x or faster).
http://www.insaneware.de/epages/6171420 ... 200rtlamv3

But if you what to build a "lasercutter" buy a laser with more power. This laser can only cut dark paper and a thin dark/grey plasic.

AND ALWAYS WEAR SAFETY GOGGLES!

Godzil
Squad Leader
Posts: 733
Joined: Sat May 21, 2011 7:21 pm
Location: Between UK and France
Contact:

Re: Microdisc replacement project

Post by Godzil » Tue Feb 25, 2014 5:52 pm

Wow and you build a device to "print" stencil with this laser :)

User avatar
metadata
Pilot Officer
Posts: 114
Joined: Wed Aug 31, 2011 7:59 pm
Location: Hildesheim, Germany
Contact:

Re: Microdisc replacement project

Post by metadata » Tue Feb 25, 2014 7:02 pm

yes. it is really simple :)
it is a Arduino the controls 2 steppermotors and the laser. The software and the firmware on the Arduino is grbl (https://github.com/grbl/grbl)
And the you can "print" from Inkscape on your laser.

Godzil
Squad Leader
Posts: 733
Joined: Sat May 21, 2011 7:21 pm
Location: Between UK and France
Contact:

Re: Microdisc replacement project

Post by Godzil » Tue Feb 25, 2014 9:39 pm

Ho! Thanks!

User avatar
Chema
Game master
Posts: 1919
Joined: Tue Jan 17, 2006 10:55 am
Location: Gijón, SPAIN
Contact:

Re: Microdisc replacement project

Post by Chema » Wed Feb 26, 2014 10:13 am

Nice, metadata. Really interesting.
metadata wrote:AND ALWAYS WEAR SAFETY GOGGLES!
Yep. Be VERY careful with this. Though 658nm laser are still in the visible range, powers higher than 100mW are really dangerous. And if you are colour-blind (like I am) to reds, it is even worse. I can hardly see the laser spot wearing glasses. It is much better to use power-controlled lasers so that you set them to low power just to adjust position and then increase it to maximum to do the operation.

User avatar
metadata
Pilot Officer
Posts: 114
Joined: Wed Aug 31, 2011 7:59 pm
Location: Hildesheim, Germany
Contact:

Re: Microdisc replacement project

Post by metadata » Sun Mar 30, 2014 9:29 pm

I worked on the case of the Cumulus a little bit. It now fits better and the PCB don't move any more.
Also i edit the connectors a little bit.
Much better :)

Downloadable at my blog http://www.boriskaminski.de/2014/03/30/ ... haeuse-v8/

User avatar
Chema
Game master
Posts: 1919
Joined: Tue Jan 17, 2006 10:55 am
Location: Gijón, SPAIN
Contact:

Re: Microdisc replacement project

Post by Chema » Mon Mar 31, 2014 12:33 pm

Glad to see you keep on improving this!

Great work!

User avatar
metadata
Pilot Officer
Posts: 114
Joined: Wed Aug 31, 2011 7:59 pm
Location: Hildesheim, Germany
Contact:

Re: Microdisc replacement project

Post by metadata » Mon Apr 28, 2014 3:33 pm

resupply has arrived :)
70 new Culumus PCB's.
Attachments
IMG_20140428_162456.jpg
IMG_20140428_162456.jpg (102.29 KiB) Viewed 5128 times

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests