Video output for Oric-1?

This is the right place to discuss on how to implement hardware vsync, adding a VIA or AY chipset, puting multiple roms, or how to design a new flash expansion card.
Post Reply
User avatar
tingo
Pilot Officer
Posts: 64
Joined: Sat Jul 11, 2009 11:30 am
Location: Oslo, Norway

Video output for Oric-1?

Post by tingo » Thu Jul 16, 2009 9:46 pm

Has anyone made a video output for their Oric-1?
I searched (ok, Googled) but couldn't find a description / building instructions anywhere.

Why do I want video instead of an RGB-to-SCART cable? Because it is easier to get the signal into a PC if the signal is video instead of RGB.
Torfinn

highwayman
Flying Officer
Posts: 148
Joined: Fri Oct 12, 2007 8:08 pm

Post by highwayman » Thu Jul 16, 2009 11:51 pm

i'm sure i just answered this in another thread! ;)

take the signal feeding the modulator and amplify it.
i think there was more talk about this here before.

User avatar
tingo
Pilot Officer
Posts: 64
Joined: Sat Jul 11, 2009 11:30 am
Location: Oslo, Norway

Post by tingo » Fri Jul 17, 2009 10:25 am

highwayman wrote: take the signal feeding the modulator and amplify it.
i think there was more talk about this here before.
Well, I couldn't find it.
I am looking for drawings, schematics, building instructions or a how-to on how to create a video output for my Oric-1.
(Yes, my electronics knowledge is a bit... old, so I need a refreshment)
Torfinn

User avatar
waskol
Flight Lieutenant
Posts: 392
Joined: Wed Jun 13, 2007 8:20 pm
Location: FRANCE, Paris

Post by waskol » Fri Jul 17, 2009 1:02 pm

you can build a simple composite cable, but you will get black and white.
http://forum.defence-force.org/viewtopi ... =composite

By software filtering of the video input, you can get back a colored picture


:wink:

Post Reply