Page 1 of 1

Cumulus incompability solved, i think.

Posted: Sun Oct 08, 2017 1:46 pm
by zaxon
Some Oric not working with Cumulus, here is small circut for mod Bus board what can help .

This circut improve O2 signal from CPU to Cumulus.

Desolder U1 pin 11 from bus board. Desoldered pin is connected to 74HCT123 pin 2 (O2IN signal )
From pin 1 74HCT123 connect ( signal O2OUT) to pad where was pin 11 of U1 soldered before.

I hope this help. Also soon i recive fixed PCB for busboards so if somebody need one let me know.

Re: Cumulus incompability solved, i think.

Posted: Sun Oct 08, 2017 1:53 pm
by Dbug
Your improved bus board is compatible with the original Cumulus built by Retromaster and Metadata?

Re: Cumulus incompability solved, i think.

Posted: Sun Oct 08, 2017 2:02 pm
by zaxon
I build some cumulus few months ago too and i build next few soon . Yes, orginal busboard for Cumulus like this, is modded ;)

Re: Cumulus incompability solved, i think.

Posted: Sun Oct 08, 2017 5:16 pm
by ibisum
Cool! I haven't run into this issue with any of my Atmos's yet, but its good to know you fixed this!