Re Oric Atmos Serial Port
-
- Pilot Officer
- Posts: 80
- Joined: Wed Feb 11, 2015 10:39 am
- Location: uk
Re Oric Atmos Serial Port
Hello,
I have been googling a lot to do with serial port (2 days) for the oric atmos (as it does not have one, easy to make).
I have seen and downloaded one interface the uses the 1Mhz bus that's ok, nothing else.
But I have not been able to fine any terminal programme to connect to the pc does anything exists or not?
or any kind of pc link programme for rs232 serial port (to transfer disk files to and from the oric atmos).
What's out there because I unable to find anything (tried looking under telestrat because it has a serial port).
I did find modem.dsk file but that's no good.
Regards
John Davis
I have been googling a lot to do with serial port (2 days) for the oric atmos (as it does not have one, easy to make).
I have seen and downloaded one interface the uses the 1Mhz bus that's ok, nothing else.
But I have not been able to fine any terminal programme to connect to the pc does anything exists or not?
or any kind of pc link programme for rs232 serial port (to transfer disk files to and from the oric atmos).
What's out there because I unable to find anything (tried looking under telestrat because it has a serial port).
I did find modem.dsk file but that's no good.
Regards
John Davis
Re: Re Oric Atmos Serial Port
Please, write something better and release it to Oric community for free.jdavis6809 wrote:I did find modem.dsk file but that's no good.
Re: Re Oric Atmos Serial Port
Is the code of this modem.dsk available somewhere?
-
- Pilot Officer
- Posts: 80
- Joined: Wed Feb 11, 2015 10:39 am
- Location: uk
Re: Re Oric Atmos Serial Port
Hello,
yes I know about ocricomms but link provide has no file for download
all I have found is dead links (404 errors)
as for modem.dsk see attached
regards
john davis
yes I know about ocricomms but link provide has no file for download
all I have found is dead links (404 errors)
as for modem.dsk see attached
regards
john davis
-
- Pilot Officer
- Posts: 80
- Joined: Wed Feb 11, 2015 10:39 am
- Location: uk
Re: Re Oric Atmos Serial Port
Hello,
I know of 2 comms software "OCRICOMMS" and "ATCOMMS" but no luck in finding the tap or dsk files.
Does anybody know were to find software above or know of any other software that does the same.
Also anybody know of any PC serial link Software for the Oric Atmos please let me know
TEAFORTWO see attached something to do with connecting two orics together via serial link or modem I do not know.
Regards
John Davis
I know of 2 comms software "OCRICOMMS" and "ATCOMMS" but no luck in finding the tap or dsk files.
Does anybody know were to find software above or know of any other software that does the same.
Also anybody know of any PC serial link Software for the Oric Atmos please let me know
TEAFORTWO see attached something to do with connecting two orics together via serial link or modem I do not know.
Regards
John Davis
Re: Re Oric Atmos Serial Port
Hi!jdavis6809 wrote:Hello,
I know of 2 comms software "OCRICOMMS" and "ATCOMMS" but no luck in finding the tap or dsk files.
Does anybody know were to find software above or know of any other software that does the same.
Also anybody know of any PC serial link Software for the Oric Atmos please let me know
TEAFORTWO see attached something to do with connecting two orics together via serial link or modem I do not know.
Regards
John Davis
What features are you looking for?
Do you know this thread? http://forum.defence-force.org/viewtopi ... =22&t=1138
- Hialmar
- Flight Lieutenant
- Posts: 349
- Joined: Tue Mar 04, 2014 11:25 am
- Location: Toulouse, France
- Contact:
Re: Re Oric Atmos Serial Port
I think John is Talking about a real Oric. This thread is about emulation.
-
- Pilot Officer
- Posts: 80
- Joined: Wed Feb 11, 2015 10:39 am
- Location: uk
Re: Re Oric Atmos Serial Port
Hello,
what tread emulation?
tread says oric hardware and extensions
I now know from older treads I have read that this has come up before.
I would really like to try building a serial port interface but with no software.
Hardware skills ok software skills for basic and machine code I lack somewhat. ok with embedded C AVR
I can read machine code and basic but not write it
give me some code I can change it but to start from scratch no.
regards
john Davis
what tread emulation?
tread says oric hardware and extensions
I now know from older treads I have read that this has come up before.
I would really like to try building a serial port interface but with no software.
Hardware skills ok software skills for basic and machine code I lack somewhat. ok with embedded C AVR
I can read machine code and basic but not write it
give me some code I can change it but to start from scratch no.
regards
john Davis
-
- Pilot Officer
- Posts: 80
- Joined: Wed Feb 11, 2015 10:39 am
- Location: uk
Re: Re Oric Atmos Serial Port
Hello,
I have had a play with modem.dsk on a emulator.
it does have rs232 terminal build in, no hand shaking just xon /xoff (its a bit crude and not easy to setup)
Does have on screen help, settings have to be made every time you boot it
I will try and setup with emulator and com1 set to hyperterminal on the laptop to see if I can send and receive ok
Then I will build the serial hardware interface.
Does anybody have manual for this program, does not matter if it is in French?
Regards
John Davis
I have had a play with modem.dsk on a emulator.
it does have rs232 terminal build in, no hand shaking just xon /xoff (its a bit crude and not easy to setup)
Does have on screen help, settings have to be made every time you boot it
I will try and setup with emulator and com1 set to hyperterminal on the laptop to see if I can send and receive ok
Then I will build the serial hardware interface.
Does anybody have manual for this program, does not matter if it is in French?
Regards
John Davis
Re: Re Oric Atmos Serial Port
No but here is some information about Oric serial interfaces (in French):
http://oric.free.fr/oric_serial.txt
Maybe it can help (IIRC especially at which address in Oric memory set the interface)
http://oric.free.fr/oric_serial.txt
Maybe it can help (IIRC especially at which address in Oric memory set the interface)
-
- Squad Leader
- Posts: 774
- Joined: Sat May 21, 2011 7:21 pm
- Location: Between UK and France
- Contact:
Re: Re Oric Atmos Serial Port
On another topic, I give the register address that the Midi/Serial extention useSymoon wrote:No but here is some information about Oric serial interfaces (in French):
http://oric.free.fr/oric_serial.txt
Maybe it can help (IIRC especially at which address in Oric memory set the interface)
My Projects: Replic'Oric Project - StratoCumulus Project
-
- Pilot Officer
- Posts: 80
- Joined: Wed Feb 11, 2015 10:39 am
- Location: uk
Re: Re Oric Atmos Serial Port
Hello,
Thanks
here is the file in English (nothing there I did not know)
Regards
John Davis
Thanks
here is the file in English (nothing there I did not know)
Regards
John Davis
Re: Re Oric Atmos Serial Port
Thanks for translation!
It was fun for me to solve the hidden puzzle in BASIC example:
I was very curious to understand what the new logical operator "GOLD" means .
It was fun for me to solve the hidden puzzle in BASIC example:
Code: Select all
POKE #321, PEEK(#321) GOLD 16
- Hialmar
- Flight Lieutenant
- Posts: 349
- Joined: Tue Mar 04, 2014 11:25 am
- Location: Toulouse, France
- Contact:
Re: Re Oric Atmos Serial Port
Hehe Google Translator (or other such automatic translator) does not like when you mix French and English (like the BASIC keywords...).