Oric-1 RGB to SCART - pin 8?

If you want to ask questions about how the machine works, peculiar details, the differences between models, here it is !
How to program the oric hardware (VIA, FDC, ...) is also welcome.
User avatar
tingo
Pilot Officer
Posts: 68
Joined: Sat Jul 11, 2009 11:30 am
Location: Oslo, Norway

Oric-1 RGB to SCART - pin 8?

Post by tingo »

Hello,
I'm going to make a RGB video to SCART buffer, as described here http://www.defence-force.org/computing/ ... are/video/
for my Oric-1.
I have read all the old threads about video out to SCART on the Oric, and nowhere is pin 8 on the SCART connector mentioned, which is defined as

Code: Select all

Pin 8		Status & Aspect Ratio up[c]
		    0–2 V → off
		    +5–8 V → on/16:9
		    +9.5–12 V → on/4:3
will the SCART circuit work without this signal?
FWIW, I'm going to convert it to a SCART to HDMI converter, not a SCART TV.
Torfinn
User avatar
Chema
Game master
Posts: 3013
Joined: Tue Jan 17, 2006 10:55 am
Location: Gijón, SPAIN
Contact:

Re: Oric-1 RGB to SCART - pin 8?

Post by Chema »

I am quite sure I had mine unconnected. But my TV is a 4:3 old CRT...

The full process is illustrated here (by Peacer) viewtopic.php?f=8&t=989&p=8964&hilit=rgb+cable#p8964
User avatar
tingo
Pilot Officer
Posts: 68
Joined: Sat Jul 11, 2009 11:30 am
Location: Oslo, Norway

Re: Oric-1 RGB to SCART - pin 8?

Post by tingo »

Thanks for the information.
For now I wired pin 8 of the SCART connector to + 5V with a jumper. Then I can try unconnected or with + 5 V at least.
Torfinn
User avatar
mikeb
Flight Lieutenant
Posts: 282
Joined: Wed Sep 05, 2018 8:03 pm
Location: West Midlands, UK
Contact:

Re: Oric-1 RGB to SCART - pin 8?

Post by mikeb »

I'm pretty sure that pin 8 open (0v) will simply leave you at the mercy of your TV set.

Depending on the set, it may show

a) Correct aspect (especially if set is old and 4:3!)
b) Stretched/Squished aspect (16:9 set trying to stretch to fill)
c) Have a setting that let's you tell it: "This is a [4:3, 16:9, 21:9] picture and please [anamorphic stretch/crop/letterbox] it"

It's only a hint to try and tell the TV what to do, some older TVs may be too stupid to even use it anyway.

No harm leaving it disconnected and seeing what happens.

Oric's picture is 4:3, so using +5v to tell the TV it's 16:9 will likely give you a picture stretched horizontally to fill the screen, and circles will be very odd.
User avatar
tingo
Pilot Officer
Posts: 68
Joined: Sat Jul 11, 2009 11:30 am
Location: Oslo, Norway

Re: Oric-1 RGB to SCART - pin 8?

Post by tingo »

Yes, I know, but it is easier to get at +5V - I already have that on the PCB. If I need higher voltage I'll just redesign the schematic with with a 5 V regulator (from 9 or even 12 volts).
Torfinn
User avatar
iss
Wing Commander
Posts: 1637
Joined: Sat Apr 03, 2010 5:43 pm
Location: Bulgaria
Contact:

Re: Oric-1 RGB to SCART - pin 8?

Post by iss »

In my opinion everything will depend on the SCART-to-HDMI converter and its possibilities to handle properly the input signal/voltage on pin 8. I don't have such converter but I remember that once I've tried one and it worked fine with normal simple (just wires) RGB-SCART cable with pin 8 connected to 5V. It was a cheap China converter.

@tingo: Can you share your model and its specifications (if available of course)?
User avatar
tingo
Pilot Officer
Posts: 68
Joined: Sat Jul 11, 2009 11:30 am
Location: Oslo, Norway

Re: Oric-1 RGB to SCART - pin 8?

Post by tingo »

I don't know if it has a model number, I just bought this one: https://www.ebay.com/itm/TPX-Monitor-Bo ... 2127915565
Torfinn
User avatar
iss
Wing Commander
Posts: 1637
Joined: Sat Apr 03, 2010 5:43 pm
Location: Bulgaria
Contact:

Re: Oric-1 RGB to SCART - pin 8?

Post by iss »

It looks good! I bet it will work :).
User avatar
Chema
Game master
Posts: 3013
Joined: Tue Jan 17, 2006 10:55 am
Location: Gijón, SPAIN
Contact:

Re: Oric-1 RGB to SCART - pin 8?

Post by Chema »

Post some pics when you have it working!
User avatar
Dbug
Site Admin
Posts: 4437
Joined: Fri Jan 06, 2006 10:00 pm
Location: Oslo, Norway
Contact:

Re: Oric-1 RGB to SCART - pin 8?

Post by Dbug »

This black one is available in multiple places with slightly different variants, I do have one (from Ali Express) and it did display the Oric picture without any problem.

I had another one of a different type (the rectangular curvy one with a light blue stripe under the name), and that one did not work at all, good things these things are cheap :)
User avatar
Symoon
Archivist
Posts: 2301
Joined: Sat Jan 14, 2006 12:44 am
Location: Paris, France

Re: Oric-1 RGB to SCART - pin 8?

Post by Symoon »

Atari and Amiga world have threads, from time to time, with VGA monitors that still support 15kHz (even if not documented).
I wonder if such screens could display our Orics?
If so how should we build the right cable?
User avatar
iss
Wing Commander
Posts: 1637
Joined: Sat Apr 03, 2010 5:43 pm
Location: Bulgaria
Contact:

Re: Oric-1 RGB to SCART - pin 8?

Post by iss »

This is SCART-RGB to VGA converter (we imagine that SCART is the same as Oric RGB output):
SCART2VGA_converter.gif
Source page found HERE.
The complexity comes from VGA requirement of separated Horizontal and Vertical Synchro signals.
I'm sure there are other solutions too.
User avatar
Symoon
Archivist
Posts: 2301
Joined: Sat Jan 14, 2006 12:44 am
Location: Paris, France

Re: Oric-1 RGB to SCART - pin 8?

Post by Symoon »

Aha, so I suspect Amigas and Atari ST are "VGA ready" when the Oric isn't (forgive newbie questions). This synchro signal thing rings a (very distant) bell
User avatar
tingo
Pilot Officer
Posts: 68
Joined: Sat Jul 11, 2009 11:30 am
Location: Oslo, Norway

Re: Oric-1 RGB to SCART - pin 8?

Post by tingo »

OK, I made the circuit (actually made a PCB for it and milled it on a small PCB mill we have at our makerspace). When connected to a TV via SCART, I have a picture. Unfortunately, the picture rolls (unable to "lock" onto VSync?). Perhaps this means that my Oric-1 needs repair? I don't know yet.
Torfinn
User avatar
Dbug
Site Admin
Posts: 4437
Joined: Fri Jan 06, 2006 10:00 pm
Location: Oslo, Norway
Contact:

Re: Oric-1 RGB to SCART - pin 8?

Post by Dbug »

Does the schematic split the Horizontal and Vertical parts of the signal?
Maybe the screen is confused because the Sync pin contains both the HSync and VSync signals?
Post Reply