Atmos keyboard cable

If you want to ask questions about how the machine works, peculiar details, the differences between models, here it is !
How to program the oric hardware (VIA, FDC, ...) is also welcome.
Post Reply
User avatar
Steve M
Flight Lieutenant
Posts: 398
Joined: Fri Mar 24, 2006 3:33 am
Location: Cumbria, UK
Contact:
Contact Steve M

Atmos keyboard cable

Post by Steve M » Thu Jun 18, 2015 12:29 pm

I have a nice keyboard but the cable came away where it was soldered. I want to replace the cable but all the stuff I can find has the wires together not spaced out as in the Oric.

Is there a kind of cable I can buy like the one used for the Atmos keyboard or would I have to buy some with twice as many wires and cut ever other one to get the spacing ?
Top
User avatar
iss
Flight Lieutenant
Posts: 471
Joined: Sat Apr 03, 2010 5:43 pm
Location: Bulgaria
Contact:
Contact iss

Re: Atmos keyboard cable

Post by iss » Thu Jun 18, 2015 2:26 pm

You can feed google with "ribbon cable 2.54 mm" to see samples.
Here are results from DigiKey (limited to 14-wire cables).
But IMO, it wouldn't be ugly if you use normal 1.27 mm flat cable and cut every other wire.
Top
User avatar
Steve M
Flight Lieutenant
Posts: 398
Joined: Fri Mar 24, 2006 3:33 am
Location: Cumbria, UK
Contact:
Contact Steve M

Re: Atmos keyboard cable

Post by Steve M » Thu Jun 18, 2015 7:08 pm

Ah, thanks. Molex stuff looks the same as Oric.
Top
Post Reply

Return to “Technical questions”

Who is online

Users browsing this forum: No registered users and 2 guests