Oric-1/Atmos ROM Switch Information

If you want to ask questions about how the machine works, peculiar details, the differences between models, here it is !
How to program the oric hardware (VIA, FDC, ...) is also welcome.
Post Reply
StarshipUK
2nd Star Corporal
Posts: 18
Joined: Sun Nov 03, 2013 8:31 pm

Oric-1/Atmos ROM Switch Information

Post by StarshipUK » Thu May 01, 2014 10:35 pm

On Wikipedia it reads:

"A short time after the release of the Atmos machine, a modification for the Oric-1 was issued and advertised in magazines and bulletin boards. This modification enabled the Oric-1 user to add a second rom (containing the Oric Atmos system) to a spare rom socket on the Oric-1 circuit board. Then, using a basic DPST (double pole single toggle) switch, the users could then switch between the new Oric Atmos rom and the original Oric-1 rom at their leisure."

Does anyone know where I can find these instructions and also if it is possible to add a Oric-1 ROM to a Oric Atmos (The other way around).

User avatar
iss
Flight Lieutenant
Posts: 495
Joined: Sat Apr 03, 2010 5:43 pm
Location: Bulgaria
Contact:

Re: Oric-1/Atmos ROM Switch Information

Post by iss » Thu May 01, 2014 10:42 pm


highwayman
Flying Officer
Posts: 148
Joined: Fri Oct 12, 2007 8:08 pm

Re: Oric-1/Atmos ROM Switch Information

Post by highwayman » Fri May 02, 2014 11:05 pm

it would be better to use a single 27c256 eprom and a pullup resistor (10k)
and a simpler spst switch.

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests