Cumulus Issues
Re: Cumulus Issues
Cheers to you all !
I want to inform you happily that I succesfully run my Cumulus first time today after months of trials and failures !
Dear friend Steve Marshall sent one of his working Oric Atmos to me and I received my new Atmos and had chance to try it with my cumulus.
In the first trial, something awful happened ! Smokes came out from my PSU unit which is supposed to give power to Atmos and microdisc together.
I don't know much about repairing in electronics and it was a devastating saddness after big enthusiasm to see if new Atmos and cumulus are working fine.
Fortunately my dad managed to mend it like McGyver and replaced all the burned diodes and PSU is recovered.
Then, I run the new Atmos without and with cumulus and this time everything went perfect !
I manage to run many disc images with cumulus and majority of them run perfectly. A few of the images stuck (like manic miner) but its not a problem at all.
So, it is clearly verified that, my own Atmos unit is not compatible with Cumulus maybe due to replaced memory chips. Cumulus is perfectly fine and running without any problem.
Thanks for all of friends here concerning my situation.
This is my perfect Oric setup with Microdisc unit, Cumulus, mp3 media player to play tap files and two beloved Atmos's running Zip-n-zap of Twilighte.. Perhaps its one of my most happy days of my life..
I want to inform you happily that I succesfully run my Cumulus first time today after months of trials and failures !
Dear friend Steve Marshall sent one of his working Oric Atmos to me and I received my new Atmos and had chance to try it with my cumulus.
In the first trial, something awful happened ! Smokes came out from my PSU unit which is supposed to give power to Atmos and microdisc together.
I don't know much about repairing in electronics and it was a devastating saddness after big enthusiasm to see if new Atmos and cumulus are working fine.
Fortunately my dad managed to mend it like McGyver and replaced all the burned diodes and PSU is recovered.
Then, I run the new Atmos without and with cumulus and this time everything went perfect !
I manage to run many disc images with cumulus and majority of them run perfectly. A few of the images stuck (like manic miner) but its not a problem at all.
So, it is clearly verified that, my own Atmos unit is not compatible with Cumulus maybe due to replaced memory chips. Cumulus is perfectly fine and running without any problem.
Thanks for all of friends here concerning my situation.
This is my perfect Oric setup with Microdisc unit, Cumulus, mp3 media player to play tap files and two beloved Atmos's running Zip-n-zap of Twilighte.. Perhaps its one of my most happy days of my life..
Re: Cumulus Issues
Thanks for the update, and glad that it finally got sorted out
Re: Cumulus Issues
Thanks
Re: Cumulus Issues
Great! I am really happy to see you sorted it out at last!
Re: Cumulus Issues
thanks to Steve
- Hialmar
- Flight Lieutenant
- Posts: 349
- Joined: Tue Mar 04, 2014 11:25 am
- Location: Toulouse, France
- Contact:
Re: Cumulus Issues
I can also confirm that Pocket's Cumulus works okay.
He lend it to me for some time. He hadn't used it before.
It works like a charm on my French Atmos (the ones that do not need a PSU for the SCART).
I will test it on other Silicium Oric 1 and Atmos. We have about 10 I think. I'll keep you posted if I see some that do not work.
I have bought the PSU recommended by Metadata and I use a 16 GB PNY SDHC Card. I tried a generic 2GB Micro-SD in an adapter but it didn't work.
PS: Just a precision, I'm still on the list and I still want a Cumulus for myself of course
He lend it to me for some time. He hadn't used it before.
It works like a charm on my French Atmos (the ones that do not need a PSU for the SCART).
I will test it on other Silicium Oric 1 and Atmos. We have about 10 I think. I'll keep you posted if I see some that do not work.
I have bought the PSU recommended by Metadata and I use a 16 GB PNY SDHC Card. I tried a generic 2GB Micro-SD in an adapter but it didn't work.
PS: Just a precision, I'm still on the list and I still want a Cumulus for myself of course
Re: Cumulus Issues
Does anyone have news from metadata? His last visit here is 2014.08.07. I hope he's doing fine!
I'm asking because with jorodr we have 2 broken Cumulus which we want to fix, but we have issues with Xilinx sources compilation - any help is appreciated!
PIC, EEPROM, displays, bus, cables are separately tested and they work...
I'm asking because with jorodr we have 2 broken Cumulus which we want to fix, but we have issues with Xilinx sources compilation - any help is appreciated!
PIC, EEPROM, displays, bus, cables are separately tested and they work...
Re: Cumulus Issues
I sent him a message some time ago, and did not get any answer either.iss wrote:Does anyone have news from metadata? His last visit here is 2014.08.07. I hope he's doing fine!
I'm asking because with jorodr we have 2 broken Cumulus which we want to fix, but we have issues with Xilinx sources compilation - any help is appreciated!
PIC, EEPROM, displays, bus, cables are separately tested and they work...
- coco.oric
- Squad Leader
- Posts: 720
- Joined: Tue Aug 11, 2009 9:50 am
- Location: North of France
- Contact:
Re: Cumulus Issues
Hello, what do you mean by issues with xilinx compilation.iss wrote:we have issues with Xilinx sources compilation - any help is appreciated!
PIC, EEPROM, displays, bus, cables are separately tested and they work...
I succeeded in the compilation of the firmware with mplab suite.
coco.oric as DidierV, CEO Member
Historic owner of Oric, Apple II, Atari ST, Amiga
Historic owner of Oric, Apple II, Atari ST, Amiga
Re: Cumulus Issues
Thanks coco.oric. We try to compile the source with Xilinx ISE. The compiler says that can't fit in such chip (XC95144XL). It's very strange. Can you send us your .jed file to try it?
Regards
Regards
Re: Cumulus Issues
@coco.oric: You said "mplab suite" - probably you mean the firmware for the PIC - yes, it can be compiled fine.
We have problems with compilation for Xilinx i.e. the sources here: http://miniserve.defence-force.org/svn/ ... ulus/cpld/
We found 2 errors in 'Cumulus.VHDL':
line 62: EA14: out std_logic; <--- ';' should be removed
line 124: port map(......., DBG2, .......); <--- DBG2 is undefined
These 2 errors are easy to fix, but Xilinx ISE reports that compiled file "can't be fit" in XC95144XL chip.
So, we need help with "Xilinx ISE"?
We have problems with compilation for Xilinx i.e. the sources here: http://miniserve.defence-force.org/svn/ ... ulus/cpld/
We found 2 errors in 'Cumulus.VHDL':
line 62: EA14: out std_logic; <--- ';' should be removed
line 124: port map(......., DBG2, .......); <--- DBG2 is undefined
These 2 errors are easy to fix, but Xilinx ISE reports that compiled file "can't be fit" in XC95144XL chip.
So, we need help with "Xilinx ISE"?
-
- Squad Leader
- Posts: 774
- Joined: Sat May 21, 2011 7:21 pm
- Location: Between UK and France
- Contact:
Re: Cumulus Issues
/me will try to download ISE and take a lookiss wrote:@coco.oric: You said "mplab suite" - probably you mean the firmware for the PIC - yes, it can be compiled fine.
We have problems with compilation for Xilinx i.e. the sources here: http://miniserve.defence-force.org/svn/ ... ulus/cpld/
We found 2 errors in 'Cumulus.VHDL':
line 62: EA14: out std_logic; <--- ';' should be removed
line 124: port map(......., DBG2, .......); <--- DBG2 is undefined
These 2 errors are easy to fix, but Xilinx ISE reports that compiled file "can't be fit" in XC95144XL chip.
So, we need help with "Xilinx ISE"?
My Projects: Replic'Oric Project - StratoCumulus Project
-
- Squad Leader
- Posts: 774
- Joined: Sat May 21, 2011 7:21 pm
- Location: Between UK and France
- Contact:
Re: Cumulus Issues
As a reminder:
metadata wrote:yes. you can't build the code as it is. There is a little error.Metadata: did you made inchanges in the VHDL Code? (I think you need to do at least one or the code won't synthetise..)
Change in Cumulus.VHDL:
port map(fdc_nCS, fdc_nRE, fdc_nWE, fdc_CLK, fdc_A, fdc_DALin, fdc_DALout, fdc_DRQ, fdc_IRQ, nRESET, nMWE, nMOE, MFS, MD, inMCRQ);
-- port map(fdc_nCS, fdc_nRE, fdc_nWE, fdc_CLK, fdc_A, fdc_DALin, fdc_DALout, fdc_DRQ, fdc_IRQ, nRESET, DBG2, nMWE, nMOE, MFS, MD, inMCRQ);
My Projects: Replic'Oric Project - StratoCumulus Project
Re: Cumulus Issues
@Godzil: Correct this fixes: DBG2 undefined bug.
EDIT: After playing with some "FIT" relater options I succeeded to generate Cumulus.jed file. There still 4-5 warnings but I think it's normal.
After we test this Xilinx file will post the results!
EDIT: After playing with some "FIT" relater options I succeeded to generate Cumulus.jed file. There still 4-5 warnings but I think it's normal.
After we test this Xilinx file will post the results!
Re: Cumulus Issues
Think I owed you a favor. Glad it arrived OK.peacer wrote: thanks to Steve
(I'll dig out a Manic Minor - if I can find it.)