How to use a 8Gb MP3 Player Recorder for Oric1 and Atmos

Anything related to the tools Tap2Wav, Tap2CD, Tap2Dsk, Sedoric Disc Manager, Tape Header Creator, WriteDsk, and generaly speaking tools related to the management of Oric data files and devices.
Post Reply
jdavis6809
Pilot Officer
Posts: 65
Joined: Wed Feb 11, 2015 10:39 am
Location: uk

How to use a 8Gb MP3 Player Recorder for Oric1 and Atmos

Post by jdavis6809 » Fri Apr 17, 2015 4:12 pm

Hello,

I have being playing around with an 8Gb MP3 player recorder of ebay (now have 2 of them)

see attached doc for more info

feedback welcome

regards

john davis

User avatar
coco.oric
Flight Lieutenant
Posts: 424
Joined: Tue Aug 11, 2009 9:50 am
Location: North of France
Contact:

Re: How to use a 8Gb MP3 Player Recorder for Oric1 and Atmos

Post by coco.oric » Sat Apr 18, 2015 7:33 am

Thanks for the idea.
It doesn't cost a lot (between 15 and 20 euros) and it doesn't need too much cables with its battery.

If i'm not able to save my tapes on my pc with symoon's solution, i'll try this one.
coco.oric as DidierV, CEO Member
Image Image

User avatar
Symoon
Archivist
Posts: 1159
Joined: Sat Jan 14, 2006 12:44 am
Location: Paris, France
Contact:

Re: How to use a 8Gb MP3 Player Recorder for Oric1 and Atmos

Post by Symoon » Sat Apr 18, 2015 8:02 am

A few remarks IMHO:

at 3.1: I would recommand the latest tap2wav, and along 11kHz, add the -a option to add a silence at the end of the WAV (if you want your manual to be generic to any mp3 player)

at 5 (Procedure for transferring cassette file), you seem to be mixing a direct recording from tape deck to MP3 player, and using CSAVE on the Oric though it hasn't loaded anything?

Whatever, there are the usual problems with this method:
1- it doesn't prevent loading errors when recording from tape
2- if you are actually CSAVING"xxx", it can lead to problems when transferring multi-part programs that want to Cload their next part with a specific name which wasn't "xxx".

Although maybe not the simpliest, the most reliable way to go is:
- directly record the tape on the mp3 player
- connect the mp3 player to the PC and check the good health of the datas by making a TAP file with the Tapetools (Wavclean + Wav2tap)
- if no errors, you can keep the original recording or convert the TAP file back to WAV with tap2wav to get a clean signal

This way, you can be sure that you didn't change the program name, and have the error detection that will tell you if your recording is correct or not (although it's just a parity check, it's rather efficient when the tape has problems)

jdavis6809
Pilot Officer
Posts: 65
Joined: Wed Feb 11, 2015 10:39 am
Location: uk

Re: How to use a 8Gb MP3 Player Recorder for Oric1 and Atmos

Post by jdavis6809 » Sat Apr 18, 2015 11:08 am

hello,

As for multipart cassettes

I transferred oric welcome tape which is three parts as one MP3 file

when program requested part 2 and part 3 just replay mp3 file until it finds it

if you use pc the same would have to be done

When I tried to load the oric welcome tape via cassette sometimes loads and sometimes not

when I transferred oric welcome tape to mp3 then played back with mp3 player recorder I got 100% reliable transfer.

All wav transfers to mp3 worked as well

I have found that some tap files do not work, when transferred only about 20 seconds long

I am in the middle of a move right now

But I will post more later with info with how many transfers are ok ( I have about 10 cassettes to transfer).

Also will post info on wav transfers what works and what does not.

Regards

john davis uk

jdavis6809
Pilot Officer
Posts: 65
Joined: Wed Feb 11, 2015 10:39 am
Location: uk

Re: How to use a 8Gb MP3 Player Recorder for Oric1 and Atmos

Post by jdavis6809 » Sat Apr 18, 2015 11:23 am

Hello,

see amended doc v2

regards

john davis uk

User avatar
ibisum
Squad Leader
Posts: 861
Joined: Fri Apr 03, 2009 8:56 am

Re: How to use a 8Gb MP3 Player Recorder for Oric1 and Atmos

Post by ibisum » Sat Apr 18, 2015 12:12 pm

Any chance for a non-.doc version of this?

User avatar
coco.oric
Flight Lieutenant
Posts: 424
Joined: Tue Aug 11, 2009 9:50 am
Location: North of France
Contact:

Re: How to use a 8Gb MP3 Player Recorder for Oric1 and Atmos

Post by coco.oric » Sat Apr 18, 2015 5:23 pm

Hello, here is last version in pdf format :)
Attachments
How to use a 8Gb MP3 Player recorder with Oric 1 and Atmos v2.pdf
Version 2 in pdf
(117.09 KiB) Downloaded 802 times
coco.oric as DidierV, CEO Member
Image Image

jdavis6809
Pilot Officer
Posts: 65
Joined: Wed Feb 11, 2015 10:39 am
Location: uk

Re: How to use a 8Gb MP3 Player Recorder for Oric1 and Atmos

Post by jdavis6809 » Tue Jul 07, 2015 1:44 pm

Update

Tested this setup on my Atmos (yes I have an Oric1 and a Atmos now)

Works ok as well as tap2cd

regards

john davis uk

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest