Audio through tv speaker

Probably the most technical forum around. It does not have to be coding related, or assembly code only. Just talk about how you can use the AY chip to do cool sounding things :)
Post Reply
User avatar
Twilighte
Game master
Posts: 819
Joined: Sat Jan 07, 2006 12:07 am
Location: Luton, UK
Contact:

Audio through tv speaker

Post by Twilighte » Fri Mar 04, 2011 1:10 pm

This might seem a strange notion since we all know that the TV does not get Oric sound but instead its channeled to the internal speaker.
However there is a distortion of sound on the tv speaker when things change on the screen.
Those mad C64 sceners have even produced crude samples by changing the screen colours to manipulate the sound interference.

http://noname.c64.org/csdb/release/?id=72678&show=notes

Search for "VIC samples" in the link above.

I do remember experiencing sound distortion on the Oric TV but whether there is enough distortion and enough speed to generate something audible out of the TV sound interference is not clear.

If anyone has a youtube link to a demonstration of this then please let me know.

Antiriad2097
Flying Officer
Posts: 148
Joined: Tue May 09, 2006 9:42 pm
Location: Aberdeen, UK
Contact:

Post by Antiriad2097 » Sat Mar 05, 2011 12:06 am

This technique goes as far back as the ZX81. If you know the ZX81, you'll be aware it has no sound output at all.

The ZX81 had two modes, fast and slow (or slow and slower still as the old gag says). In slow mode, the system works much like any other computer, but in fast mode it disables the screen display while it works, only turning it back on once its finished. By varying the on/off duration at rapid speeds, its possible to get white noise tones from the disabled screen as the tv effectively has no signal.

Not sure it'd work with a modern TFT display, but it (sort of) works with an old CRT.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest